Spike – Long Leg Extension Set

The long leg extensions were specifically designed to bring the racking port to a height where the conical can be gravity drained into a 5 gallon corny keg. However they are pretty long for those people that do not need to gravity transfer but want the conical high to use a sight glass for example.

Sight Glass 2″ – Spike

2″ Sight Glass

Our engineers have totally redesigned the 2″ TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Our new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. 

The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. The 2″ sight glass is also helpful when collecting yeast with our conical fermenters.

Specs:
-2″ tri-clamp
-304 stainless steel
-Extra thick Pyrex glass
-6” long

-25% lighter than standard 4 bolt sight glasses

Flex Bracing Shelf – Spike

The Spike extended bracing shelf is a recommended addition when casters or leg extensions are installed. The extended bracing shelf widens the stance of the FLEX making it more stable. This helps when going vertical with the leg extensions or mobile with casters. 

Specs: 
-304SS
-Super thick 14ga material
-Made in the USA

Spike Thermometer – Adjustable Face

This adjustable face dial thermometer can be orientated 360 degrees so reading the thermometer is easier. This 1/2” NPT Brew Thermometer is ready to screw in any 1/2″ port on your kettle.

Specs:
-1.5″ TC connection
-3″ dial
-304SS
-2.5″ stem length
-Calibration adjustment screw

Spike TC-100 BUNDLE w/ Heat – CF5

The Spike TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller’s temp probe will feed into the included thermowell on our CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Last (and maybe the coolest item) is our special insulated tubing. This almost eliminates tube cooling losses and will prevent your cooling lines from sweating all over your floor!

?

Cooling:

When the temp in the conical rises above the set point it will turn on the pump submerged in your cold water reservoir (bucket of ice water, dorm fridge, aquarium or glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point.

?

Heating:

When the temp in the conical falls below the controller set point the optional heater will kick on warming the unit up.?

?

TC100 Package:

-Digital closed loop controller (heating and cooling)

-Insulated tubing (more efficient and no more sweaty tubes!

-Temp control coil

-Thermowell

-Neoprene insulated jacket

-Submersible pump (pumping cold water through the temp coil)

-Temp Coil Quick Connect Fittings

TC100 + Heat Package:

-TC100 Package (above)

-Optional heater included

Spike – Blow Off Cane – Standard Tube End

This USA made blow off-cane is designed to attach to the 1.5″ TC on the lid of the Spike Brewing Conicals conicals.

Options:
Standard: For use as a standard blow off into sanitizer

1.5″ TC End: Use for a blow off into sanitzer with a barb and/or attach the Spike Gas Manifold.

Specs:
-1.5″ TC
-304SS
-15â total drop
-Works with every size conical
-Made in the USA

SPIKE – Racking Arm

Another cool product the  engineers and in-house welders developed at Spike Brewing – a USA made racking arm. This racking arm provides 6″ of total travel allowing you to draw clear wort even with the hoppiest of beers.

The racking arm also incorporates a position indicator that is welded on so the orientation of the racking arm can easily be seen from the outside of the sealed conical (especially useful in closed pressure transfers).

Specs:
-1.5″ TC
-304SS
-Position indicator
-Works with every size conical
-Made in the USA

Spike TC-100 BUNDLE – CF Unitanks Various Sizes

The TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller’s temp probe will feed into the included thermowell on our CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Last (and maybe the coolest item) is our special insulated tubing. This almost eliminates tube cooling losses and will prevent your cooling lines from sweating all over your floor!

Cooling:
When the temp in the conical rises above the set point it will turn on the pump submerged in your cold water reservoir (bucket of ice water, dorm fridge, aquarium or glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point.

Heating:
When the temp in the conical falls below the controller set point the optional heater will kick on warming the unit up.

Detailed product guide:
Product Guide.pdf

TC100 Package:
-Digital closed loop controller (heating and cooling)
-Insulated tubing (more efficient and no more sweaty tubes!
-Temp control coil
-Thermowell
-Neoprene insulated jacket
-Submersible pump (pumping cold water through the temp coil)
-Temp Coil Quick Connect Fittings

TC100 + Heat Package:
-TC100 Package (above)
-Optional heater

Spike Brewing CF15 Unitank

CF15 Features:
-304 stainless steel; 1.2mm (18ga)
-All sanitary welded ports (no-weldless fittings)
-All hardware shown here is included!
-Designed for 5gal to 1/2bbl batches
-18gal total capacity
-15psi working pressure (always use a 15psi pressure relief valve)
-Use for pressure transfers
-Use as a brite tank
-Etched volume markings
-17″ wide by 39¨ tall
-Fully polished finish

Lid Features:
-4″ TC modular top port
-Allows for hop additions, temp control coil, top sight glass, etc
-1.5″ TC port
-Use with blow off or air lock, blow off cane, pressure transfer, CIP ball, etc
-Stainless band clamp for attaching the lid
-Completely removable lid for easy cleaning

Body Features:
-Huge 2″ TC bottom dump with butterfly valves (no more stuck yeast dumps)
-1.5″ TC racking port with butterfly valve
-1.5″ TC sample valve (for taking gravity readings)
-1.5″ TC dial thermometer

SPIKE+ PICKUP TUBE – SIDE

The Spike+ side pickup is specially designed to work with our Spike+ line of kettles. The dual 1.5″ TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5″ TC accessory attached to the outside. We use 5/8″ tubing which flows up to 4x better than our competitors 1/2″ size.

Recommend Uses:

  • Boil Kettle – Create a whirlpool inside your kettle so hop material collects in the center of the lower stepped section. The side pickup will drain clear wort from the side, above the stepped bottom, avoiding the hop and trub material which has settled.
  • Custom Kettles – Works as a top re-circulation arm or a whirlpool arm.

Features:
-One size fits all Spike+ kettles
-Oversized 5/8″ diameter 304 stainless tube
-Sized to pick up from above the stepped bottom to avoid hop/trub pickup
-Rotatable from the outside when installed
Made in the USA

Spike Brewing – 4″ CLEAR TC CAP

Probably the coolest add-on for our new conical line! We’ve heard many brewers who have switched from clear carboys to stainless and they only have one complaint; I can’t see my beer fermenting any more! Brewers are curious by nature and we’re not ones to stop that curiosity so here is our solution to that problem.

Our engineers designed a clear polycarbonate (same material as bullet proof glass) cap which allows you to see inside the top of the conical when it’s fermenting. This has also been tested against common brewery chemicals and has held up against the likes of PBW and StarSan.

Specs:
-4″ TC
-Clear polycarbonate material

Spike Brewing – TC SAMPLE VALVE

An effective accessory that can be used with your FLEX is our sanitary sample valve. Taking samples has never been so easy; simply twist the valve handle to slowly draw out a sample from your FLEX for a gravity reading. The one downside is you might end up with lower final volumes due to how easy it is to take taste tests 😉

Specs:
-1.5″ TC
-304SS
-FDA Silicone seals
-3/8″